VPLEX visual systems infrastructure/2026

Behind every
image.

Server racks, projector enclosures, power management, fibre, cabling and installation hardware for professional visual systems.

014rack platforms
023enclosure formats
035infrastructure families
04∞project configurations

The infrastructure is part of the visual system.

Rack integration, environmental protection, power, signal termination, cabling and installation hardware are coordinated around the same operating environment as the displays.

The physical backbone of the AV system.

Professional 19-inch rack platforms selected around equipment depth, heat load, cable access, service clearance and future expansion.

Representative professional 42U mesh-door AV equipment rack
01VP-RK-42-608
42U

600 × 800 mm

General AV, control and network rooms

02VP-RK-42-811
42U

800 × 1100 mm

Deep equipment and high-density AV systems

03VP-RK-47-608
47U

600 × 800 mm

Tall-format AV and network installations

04VP-RK-47-811
47U

800 × 1100 mm

Large AV systems with deeper equipment loads

Rack depth, doors, side panels, fan trays, castors, levelling feet, vertical cable management, shelves and PDU provision are configured against the approved equipment schedule.

Protection designed around the installation.

Environmental enclosures coordinate access, cooling, optical clearance and protection without compromising projector performance.

01VP-PL-22
Representative ceiling plenum enclosure with serviceable equipment rack

HVAC plenum enclosure

A serviceable projector plenum with removable equipment tray, dust gaskets, ACMV supply and return interfaces, and thermal cut-out.

  • 2.2 kW thermal design allowance
  • ACMV interface
  • Service access
02VP-PH-22I
Representative black indoor projector hush box with ventilation duct

Indoor projector housing

A filtered, fan-cooled indoor housing with optical window, service door and monitored thermal protection for demanding installations.

  • Filtered forced air
  • Optical window
  • Thermal protection
03VP-PH-22O
Representative powder-coated projector environmental enclosure with optical window

Sheltered-outdoor housing

A corrosion-resistant aluminium enclosure with rainhood, UV-resistant seals, optical glass and temperature monitoring.

  • Sheltered outdoor
  • Corrosion resistant
  • Environmental monitoring

Purpose-built parts of the complete system.

Power management, rack integration, termination, cabling and custom hardware are selected as coordinated system components.

01VP-SEQ16-8C13
Representative rackmount multi-channel power sequencer

Power management

16 A, 230 V rack power sequencer with eight rear IEC C13 outputs and grouped switching for controlled system start-up and shutdown.

  • 16 A / 230 V
  • 8 × IEC C13
  • Permit input
02VP-ODF SERIES
Representative rack fibre patch panel with LC duplex adapters

Fibre termination

Rack fibre termination platforms for organised splicing, patching, labelling and long-term service access.

  • VP-ODF48D
  • LC duplex adapters
  • Sliding service tray
03VP-C6 SERIES
Representative factory-terminated Cat6 patch cord

Data assemblies

Factory-terminated LSZH Cat6 assemblies for short, clean connections between rack equipment, patching and control interfaces.

  • VP-C6-PAN-178 / 254
  • VP-C6-AGI-178 / 254
  • Custom lengths
04VP-SP / VP-CA SERIES
Representative four-core LSZH speaker cable reel and exposed conductors

Audio cable systems

Indoor LSZH and outdoor UV-resistant speaker cable families, plus application-built balanced and unbalanced audio assemblies.

  • 2-core / 4-core speaker cable
  • 12–18 AWG
  • VP-TRS-3M / VP-TS-3M
05PROJECT-SPECIFIC
Representative black powder-coated custom projector mounting hardware

Custom installation hardware

Projector carriers, planter-speaker brackets, secondary safeties and installation hardware engineered around the equipment and architecture.

  • VP-SPK-PB316
  • Custom AV brackets
  • Application-specific fabrication

Reference photography shows representative commercial products and construction approaches. Final VPLEX model, dimensions, finish, connectors and fabrication are project-configured.

Configured as one working system.

Public model references define the platform. Final engineering confirms dimensions, access, power, ventilation, termination and mounting against the real installation.

01

Application load

Rack capacity, power and thermal design start with the real equipment schedule, signal map, duty cycle and environmental load.

02

Service access

Racks, enclosures and support hardware are arranged for installation, inspection, replacement and long-term maintenance.

03

System interfaces

Power, data, cooling, signal and control are coordinated as documented interfaces—not left as isolated product decisions.

04

Project configuration

Final I/O, storage, optics, protection and fabrication are confirmed against the approved equipment and installation conditions.

Start with the complete load.

Share the display system, signal map, equipment schedule, thermal environment and service conditions. VPLEX will map the racks, enclosures, power and cabling around them.

Review system families